Sheraton, Thomas; Bensley, Thomas; Mathews, James; Bensley, Thomas [Bearb.]; Mathews, James [Bearb.]; Terry, George [Bearb.]; Jordan, Jeremiah Samuel [Bearb.]; Wayland, L. [Bearb.]: The Cabinet-Maker And Upholsterer's Drawing-Book: In Three Parts (London: Printed For The Author, By T. Bensley; And Sold By J. Mathews ... C. Terry ... J.S. Jordan ... L. Wayland ... And By The Author, 1793)

( 43«> )

The inner lining for the fly-brackets to fall again ft, is not
lets than three quarters thick when planed ; and it muft be the
whole breadth of the end rails, i. e. eight and a quarter. The
fly-bracket makes up the remaining thicknefs of the foot, and
comes down low enough to anfwer the height of the upper
crofs-band of the lower drawer. The part remaining below the
bracket is veneered the whole length with fatin-wood, and
crofs-banded, to match the drawer fronts. The workman, in
making the fly-bracket to which the winch c is fcrewed, muft
oblerve to make a fhoulder pin on the turning part of it at the
under edge: and this fhoulder will require to be double the
ufual thicknefs, that the iron winch c may be let into the bracket
without injuring the rule-joint, or interfering with the wire of
its center.
The lock, at No. 2 or 3, is put on at the infide of the inner
lining, fo near to the axis a at No. 1, as that the fork D of the
lock lhall extend to the groove d in the focket of the axis a by
which then will determine the place of the key-hole, as ihewn
in the deiigm